Whole-Building Surge Protection in Atwater Village
Protect every circuit in your Atwater Village home from sudden voltage spikes caused by grid events, solar backfeed, EV charging, and HVAC cycling. Whole-building surge protection shields sensitive electronics, appliances, and smart-home systems in one smart, code-compliant install—ideal for Craftsman bungalows and Spanish colonials off Glendale Blvd or near the LA River bike path. Shaffer Construction, Inc. designs and installs UL-listed, code-compliant surge protective devices sized to your panel and lifestyle. We verify and enhance grounding, test performance, and walk you through maintenance. Most installs are completed in a half day, with an all-in timeline of about 2–4 weeks including permits and inspection.
Our Work
Benefits
Engineered for Tomorrow's Needs
We specify Type 1 or Type 2 UL 1449 4th Edition surge protective devices (SPDs) from Eaton, Siemens, Leviton, or Square D, sized to your service and available fault current. We integrate with smart load centers and backup systems, add subpanel SPDs where needed, and include visible status indication. For solar/EV-heavy homes, we use high-SCCR devices and coordinate protection at PV interconnects to ensure scalable, future-proof performance.
Permits and Code Compliance Simplified
Shaffer Construction manages LADBS permits and inspections end-to-end. Installs follow the Los Angeles Electrical Code and NEC requirements, including NEC 230.67 for dwelling-unit service surge protection. We verify grounding and bonding per NEC Article 250, apply manufacturer torque specs, and label equipment for inspection. Our documentation package expedites approvals and ensures everything is recorded for resale and insurance.
Trusted Workmanship and Quality
We use UL-listed SPDs (typically 50–100 kA per mode, 200 kA SCCR), copper conductors with short, straight leads for low impedance, and listed grounding electrodes/rods with corrosion-resistant clamps. Connections are torqued to spec and neatly dressed in EMT or approved raceways. We test ground continuity/bonding, label circuits, and provide a maintenance guide to ensure long-term reliability.
Solutions Customized to You
Every home is different. We assess your service size, panel brand, presence of subpanels, solar/battery systems, and sensitive loads like HVAC, refrigeration, and home-office gear. We then select an SPD with appropriate MCOV, modes of protection (L-N, L-G, N-G), and short-circuit ratings. If the grounding system is marginal, we design upgrades to meet code and actual performance needs.
What We Offer
Frequently Asked Questions
Do Atwater Village homes need surge protection even without frequent lightning?+
Yes. In LA, most damaging surges come from utility switching, voltage fluctuations during heat waves, and on-site sources like solar inverters, EV chargers, and HVAC motors. A whole-home SPD tames those transients before they reach appliances and sensitive electronics.
Will installation cut my power and how long does it take?+
We schedule a convenient half-day window. Power is typically off for 30–60 minutes while we mount the SPD and complete grounding/bonding work. Most homeowners are back to normal operations before lunch, with inspection following shortly after.
Is a permit required for surge protection in Atwater Village?+
Yes. We obtain an LADBS electrical permit and meet the inspector after installation. Most permits are issued quickly via e-permit, and inspections are commonly available within a few business days, keeping the overall timeline to about 2–4 weeks.
Will a whole-home SPD work with my solar panels or battery system?+
Absolutely. We specify SPDs compatible with PV and energy storage systems and coordinate protection at the main service and PV interconnect. Proper placement and high short-circuit ratings ensure reliable protection without affecting system performance.
Whole-building surge protection is a small upgrade that pays off every day your lights are on. We start with a focused assessment, design for your panel and equipment, secure LADBS permits, and complete a tidy half-day install. Then we test, label, and meet the inspector so you can move on with confidence. Whether you’re near Glendale Blvd, the Atwater Village Farmers Market, or a quiet block along Edenhurst Ave, we bring dependable service and clear guidance. Call or text Shaffer Construction, Inc. at (323) 642-8509 or email hello@shaffercon.com to schedule your assessment. We’ll protect your home’s power—quietly and completely.
Ready to Get Started?
Contact us today for a free consultation and quote on your electrical project!
Contact Us