Residential Security & Motion Lighting in Burbank
Light up your Burbank home the right way. Shaffer Construction, Inc. designs and installs security and motion-activated lighting that fits your property, your neighborhood, and your lifestyle. Whether you're near the Warner Bros. lot, in Magnolia Park, or up by the Verdugo foothills, we create bright, reliable coverage without glare or light trespass. Our licensed electricians handle everything, from assessment and design to permits, installation, and programming, so you don't have to. Expect fast timelines (1–3 days for most installs), durable outdoor-rated materials, and smart integrations that work with your existing cameras and apps. Thoughtful placement, energy-efficient LEDs, and intelligent controls keep your home safer while keeping your energy use low.
Local proof
Security Motion Lighting local planning in Burbank
Local electrical work is not just a generic service list. In Burbank, the practical plan depends on the utility, permit path, property type, parking layout, and inspection access before installation starts.
Utility planning
Burbank Water and Power service capacity can affect EV chargers, panel upgrades, dedicated circuits, and larger commercial electrical work.
Permit path
Burbank electrical projects often involve municipal utility coordination through Burbank Water and Power and city permit review for service changes, EV chargers, and commercial improvements.
Property context
Burbank includes single family homes, apartment buildings, studios, offices, warehouses, and retail spaces with varied electrical loads and access conditions.
What we check before work starts
These checks help the page match real local job conditions, and they give customers clearer reasons to call before buying equipment or opening a permit.
Security Motion Lighting scope, access, permit requirements, and inspection sequencing in Burbank.
Existing panel capacity, feeder condition, grounding, breaker space, and equipment location before installation.
A practical route for wiring, conduit, controls, labeling, and future maintenance for homeowners.
Parking and commercial context
Garages, carports, studio lots, and commercial parking areas can affect charger layout, metering, conduit routing, and load management.
Studio, office, retail, and warehouse properties commonly need dedicated circuits, lighting retrofits, panel service, backup power planning, and EV charging infrastructure.
Nearby service context
Our Work
Benefits
Lighting for a Safer Tomorrow
We design security lighting as part of a connected home. From Lutron Caséta wireless switches and occupancy sensors to Ring or Nest floodlight cameras and photocell/timeclock automation, we build scalable systems you can expand later. We can hardwire PoE-ready camera floodlights, add whole-home surge protection, and use dimmable LED fixtures with selectable color temperatures. Our layouts include Wi-Fi and network considerations so motion alerts, scenes, and schedules work reliably across your property.
Code-Compliant Installations
Shaffer Construction manages permitting with the City of Burbank Building and Safety Division, ensuring plans meet the 2022 California Electrical Code (CEC) and Title 24 Part 6 lighting control requirements. We submit one-line diagrams, fixture cut sheets, and load calculations when needed, and coordinate inspections to minimize downtime. Our installations include required GFCI/AFCI protection, proper grounding, and wet-location ratings, so your project passes inspection the first time and performs safely for years.
Professional, Lasting Workmanship
We use UL-listed, outdoor-rated fixtures and materials: LED flood lights with sealed optics, silicone-gasketed housings, stainless fasteners, and UV-resistant grommets. Exterior boxes are NEMA 3R or 4X where required, conductors are copper THWN-2 in Schedule 40/80 PVC or EMT, with proper expansion couplings. All penetrations are sealed, and we fine-tune beam angles to reduce glare. Expect neat, labeled panels, tidy conduit runs, and aim-and-test walkthroughs at dusk to verify uniform coverage.
Customized Lighting Design
Every property is different. We start with a dusk or early-morning assessment to map approach paths, dark corners, camera fields of view, and neighbor sightlines. We set target foot-candle levels for driveways, side yards, and entrances, then choose beam spreads, color temperature (usually 3000–4000K), and mounting heights. For ranch homes with deep eaves, soffit mounts keep fixtures discreet. For townhomes, we coordinate with HOA guidelines to maintain a cohesive look while improving security.
What We Offer
Frequently Asked Questions
Do I need a permit in Burbank for new security lighting circuits?+
If we’re adding new circuits, relocating wiring, or installing new boxes outdoors, a permit is typically required by the City of Burbank Building and Safety Division. Replacing an existing fixture like-for-like may not require a permit. We evaluate your scope during the assessment and handle all permitting and inspections for you.
How do you prevent light glare for my neighbors in Magnolia Park?+
We use full or semi-cutoff fixtures, aim beams carefully, and select appropriate lumen levels and 3000–4000K color temperature. During our evening aiming session, we fine-tune tilt and sensor zones to illuminate your paths and doors without spilling light across property lines, especially important on narrow lots common in Magnolia Park.
Will the hot Burbank summers affect my motion lights?+
We specify outdoor fixtures rated for high ambient temperatures and use sealed, UV-resistant components. Motion sensors are placed out of direct afternoon sun when possible, and we use robust housings and gaskets to handle 90–100°F days and Santa Ana winds. Proper installation extends fixture life and reduces false triggers.
Can you integrate lights with my Ring cameras and Lutron switches?+
Yes. We commonly integrate Ring floodlight cams and Lutron Caséta switches or occupancy sensors for coordinated control. We set schedules, motion sensitivity, and notifications in the app, and ensure your Wi‑Fi coverage supports reliable alerts at gates, garages, and side yards.
Picture this: your Burbank property, whether you're near Magnolia Park, in the Media District, or closer to Empire Center, has perimeter lighting that actually works. Motion sensors catch movement without burning power. Dusk-to-dawn circuits run on schedule. Security and efficiency stop competing and start working together. That's what thoughtful design does. Shaffer Construction holds a triple California CSLB license: General, Building, and Electrical, which most local contractors don't carry. We manage City of Burbank permits in-house, keeping your installation code-compliant without red tape. With 25 years in Los Angeles and 1,000+ completed projects, our crews understand Burbank's specific landscape, how to blend residential security with proximity to commercial zones and the studios. Your motion lighting system should feel built for your house, not off-the-shelf. Let's talk. Call (323) 642-8509 or email hello@shaffercon.com, honest advice, no high-pressure pitch.
Ready to Get Started?
Contact us today for a free consultation and quote on your electrical project!
Contact Us