Commercial Pool, Hot Tub & Spa Electrical in Santa Clarita
Operate your pool, spa, or hot tub with confidence. Shaffer Construction, Inc. designs and installs code-compliant, energy\u2011smart electrical systems for hotels, HOAs, fitness clubs, and community centers across Santa Clarita. From Valencia's business parks near Six Flags Magic Mountain to townhome clubhouses in Canyon Country, we handle everything from bonding and GFCI protection to automation and lighting upgrades. Our team brings deep NEC Article 680 expertise, fast permitting, and turnkey project management so your facility stays open, safe, and efficient. Whether you're replacing legacy pump circuits at an HOA in Saugus or adding a new spa at a Newhall boutique hotel, we deliver reliable power, clean installations, and smooth inspections—on time and on budget.
Our Work
Benefits
Future-Proof Pool Electrical Systems
We engineer commercial pool and spa power systems that scale with your property. Our designs leverage variable‑speed pump compatibility, dedicated GFCI‑protected circuits, and smart controllers (Pentair IntelliCenter Commercial, Hayward CAT, Jandy automation) that integrate with building management systems. We specify THWN‑2 copper conductors, surge protection for VFDs, and LED lighting with low‑voltage isolation transformers. Title 24-compliant exterior lighting controls—photocells and astronomical time switches—optimize energy use while meeting code. The result is a modern, upgrade‑friendly platform that reduces operating costs and simplifies future expansions.
Local Codes and Compliance
Commercial aquatic work must meet NEC Article 680 and California Electrical Code requirements, plus Los Angeles County Public Health rules for public pools. We handle plan sets, one‑line diagrams, load calcs, and permit submittals to the City of Santa Clarita Building and Safety Division. Our team schedules rough bonding and final inspections, and coordinates with Environmental Health for pre‑opening sign‑off. We also address Title 24 Part 6 lighting controls and ADA‑related power needs for lift equipment—so your project passes the first time and stays compliant long term.
Unmatched Quality & Reliability
We use corrosion‑resistant, outdoor‑rated components: NEMA 3R/4X enclosures, Schedule 40 PVC underground with Schedule 80 above‑grade risers, and liquid‑tight flexible conduit for equipment terminations. Bonding is performed with solid #8 AWG copper and listed clamps; all splices are made in gasketed, UL‑listed boxes with proper cubic inches. Motor circuits are sized per NEC 430 (typically at 125% of FLA) to minimize voltage drop on long runs. Every installation is torque‑verified, labeled, megger‑tested where appropriate, and documented for your facility records.
Custom Solutions for Every Facility
We begin with a site walk and as‑built review to capture pump room locations, deck materials, metal components, and existing panel capacity. We then produce a stamped one‑line diagram, circuit schedules, and a bonding plan showing grids, connections to handrails and fences, and light transformer placement. For retrofits, we develop strategies to add equipotential bonding around existing decks. Stakeholder coordination—property managers, HOA boards, hotel engineering, and pool service vendors—keeps the design aligned with budgets and operational needs.
What We Offer
Frequently Asked Questions
Do I need both city and county approvals for our HOA pool electrical work in Santa Clarita?+
Yes. The City of Santa Clarita issues electrical permits and inspections. Because HOA pools are considered public/semi‑public in California, Los Angeles County Department of Public Health (Environmental Health – Recreational Waters Program) also reviews and inspects. We coordinate both so bonding, GFCI, lighting, and equipment shutoffs meet all requirements before reopening.
Can you keep our pool or spa open during the electrical upgrade?+
Often, yes. We phase work—running new conduits, setting disconnects, and prepping circuits—while keeping existing systems live, then perform a short changeover (typically a few hours) to minimize downtime. For safety, some tasks require temporary closures, especially during bonding inspections or when replacing light transformers in wet niches.
What are the emergency shutoff requirements for commercial spas and hot tubs?+
NEC Article 680 requires an emergency shutoff switch for spas and hot tubs in public or commercial locations. It must be within sight of the spa/hot tub and located at least 5 feet from the water’s edge. We install clearly labeled, weather‑rated shutoffs and verify they de‑energize pumps and associated equipment during commissioning.
Our clubhouse panel is from the 1990s. Will it handle new variable‑speed pumps and heaters?+
We’ll perform a load calculation and thermal scan, then measure voltage drop to the equipment pad. Many 1990s panels are undersized for today’s combined loads (pumps, heaters, lighting, EV chargers). We can add a dedicated subpanel, upsize conductors, or re‑balance loads to support new equipment without nuisance tripping.
How do you handle equipotential bonding on existing decks?+
For retrofits, we expose areas adjacent to the pool/spa perimeter and install a #8 solid copper bonding ring 18–24 inches from the water’s edge and 4–6 inches below the deck surface. We bond handrails, ladders, diving board bases, metallic fencing within 5 feet, and equipment. Where full access isn’t possible, we use listed alternatives and document continuity for inspection.
Ready to Get Started?
Contact us today for a free consultation and quote on your electrical project!
Contact Us