Pool, Hot Tub & Spa Electrical in Burbank

Yes—new 240V spa circuits, bonding, or disconnects require an electrical permit from the City of Burbank Building and Safety Division. Portable 120V plug-in units may not need a new circuit, but still must meet GFCI and clearance rules. We handle permits and inspections and guide you through HOA approvals if required.

Article 680 of the 2022 CEC sets clearances. Receptacles must be GFCI protected and 6–10 feet from the water’s edge (depending on type); switches typically at least 5 feet away. Pool/spa luminaires must be listed for wet locations, and low-voltage systems require proper transformers and bonding. We design layouts to meet these distances and pass inspection.

Often not without careful load calculations. Many mid-century Burbank homes also power EV chargers, HVAC, and home offices. We perform code-compliant load calcs and, if needed, plan a 200A upgrade with Burbank Water and Power coordination. Sometimes a subpanel at the equipment pad is the right solution.

Most installations take 1–3 days once the permit is issued. Expect some trenching, brief power shutdowns for breaker installation, and testing. We protect landscaping, route conduit neatly, and keep pathways clear. After we test GFCI and equipment functionality, we meet the inspector for final sign-off and provide documentation.