Security & Motion Lighting in Glendale
Protecting your Glendale business after hours takes smart, reliable lighting that deters intruders, improves visibility for cameras, and keeps employees and customers safe. Shaffer Construction, Inc. designs and installs commercial-grade security and motion lighting systems tailored to the way Glendale works—from bustling Brand Boulevard and the Glendale Galleria to the industrial corridors along San Fernando Road. We combine modern LED fixtures, intelligent sensors, and Title 24–compliant controls with a clean, efficient installation. Expect measurable savings, fewer blind spots, and lighting that adapts to real use—not just the clock. Whether you operate a retail storefront near The Americana at Brand, a medical office by Adventist Health Glendale, or an HOA garage in Verdugo Woodlands, we'll build a lighting plan that performs every night, all year.
Our Work
Benefits
Lighting for a Safer Future
We future‑proof your security lighting with scalable controls and open standards. Using networked systems like Lutron Vive or nLight Air, 0–10V dimming, photocells, and microwave/PIR sensors, we create bi‑level lighting that adapts to occupancy and daylight. We can add BLE mesh nodes or gateways later to integrate with access control and CCTV analytics. Cloud dashboards, remote scheduling (astronomical time clocks), and energy reporting keep you compliant and informed without rolling a truck.
Fully Compliant Installations
Shaffer Construction manages the entire permitting workflow with Glendale Building and Safety, coordinates with the Planning Division when a photometric plan or fixture spec review is needed, and ensures your system passes Title 24 acceptance testing. We design to the California Electrical Code and Title 24 Part 6 (bi‑level control, shutoff, daylighting where applicable), follow IES recommendations for site lighting, and use dark‑sky‑friendly optics and shielding to meet Glendale’s light‑trespass expectations.
Expert Workmanship Guaranteed
Our installations use DLC Premium LED fixtures, wet‑location rated wire connectors, THHN/THWN‑2 copper conductors in EMT or rigid/PVC where appropriate, NEMA 3R/4X enclosures, and 10kV–20kV surge protection at panels or poles. We specify powder‑coated, tamper‑resistant luminaires with precision optics (Type II–V distributions) and color temperatures tuned for the site (3000K–4000K). Every connection is properly sealed, drip loops are formed, and penetrations are weatherproofed for long life in Glendale’s heat and wind.
Tailored Lighting Designs
We start with a daytime and (if needed) nighttime walk‑through, mapping cameras, entrances, alleys, docks, and parking. We model fixture locations, beam spreads, and mounting heights to eliminate shadows and hot spots. If you’re near Brand Blvd or adjacent to homes, we’ll design shielding and aim angles to meet local expectations. We coordinate with your security vendor to ensure motion sensor zones align with camera fields of view and adjust timeouts and dim levels to your operations.
What We Offer
Frequently Asked Questions
Do I need a permit in Glendale to upgrade exterior wall packs to LEDs with motion sensors?+
If you’re adding new circuits, relocating fixtures, or changing controls, Glendale typically requires an electrical permit through the Building and Safety Division. One‑for‑one fixture swaps may be over‑the‑counter in limited cases, but Title 24 control requirements still apply. We review your scope, advise on the exact permit path, and handle the submittal and inspection.
Can you prevent glare and light trespass into nearby homes in Adams Hill or Rossmoyne?+
Yes. We use full cutoff optics, house‑side shields, and precise aiming. We also tune color temperature (often 3000K near residences) and use bi‑level dimming so lights run at a lower level until motion occurs. Photometric modeling helps verify coverage on your site while limiting spill into adjacent properties.
Will the system comply with California Title 24 for after-hours security lighting?+
We design bi‑level operation—dimmed to 10–30% after hours and to full output on motion—and incorporate automatic shutoff via photocells or astronomical time clocks. This approach meets Title 24 Part 6 control requirements while keeping your cameras effective and your property secure.
How long will installation take and can you work at night to avoid disruption?+
Most commercial security and motion lighting projects install in 1–3 days, depending on circuit needs and lift access. We regularly schedule night or early‑morning work for retail centers, parking structures, and restaurants along Brand Boulevard to minimize impact on customers and deliveries.
Are rebates available through Glendale Water & Power (GWP) for LED and controls?+
GWP has historically offered business rebates for qualifying LED fixtures and control upgrades. Programs and amounts change, so we verify current incentives, select eligible products (e.g., DLC listed), and prepare the documentation to help you capture available savings and accelerate payback.
Ready to Get Started?
Contact us today for a free consultation and quote on your electrical project!
Contact Us