EV Charger Installation in West Hollywood
Live in West Hollywood and ready for convenient at\u2011home EV charging? Shaffer Construction, Inc. designs and installs clean, code\u2011compliant Level 2 chargers for condos, apartments, townhomes, and single\u2011family homes across the city—from the Sunset Strip and Santa Monica Boulevard to the Design District by the Pacific Design Center. We handle everything: load calculations, permits, HOA coordination, and neat installations that fit your space. Our licensed electricians deliver safe, fast charging that integrates with your lifestyle and smart home. Expect professional communication, transparent pricing, and a smooth experience from first call to first charge.
Our Work
Benefits
Future-Ready Charging Solutions
We design for today’s needs and tomorrow’s. Our installations support 40–60A circuits for faster Level 2 charging, with options for dynamic load management (e.g., DCC devices) to avoid costly service upgrades. We commonly install smart chargers like Tesla Wall Connector, ChargePoint Home Flex, and Wallbox Pulsar Plus that offer app‑based scheduling, energy monitoring, and power sharing for two EVs. We can integrate with home energy monitors and solar/battery systems, enable time‑of‑use charging, and leave capacity and conduit paths in place for future expansion.
Permit Handling and Code Compliance
Shaffer Construction manages permitting and inspection end‑to‑end. We design to the 2022 California Electrical Code (based on NEC 2020), including Article 625 (EVSE), continuous‑load sizing, GFCI protection in garages, and proper labeling. We coordinate with the City of West Hollywood Building and Safety Division and, when needed, SCE for meter/service work. For multifamily/HOA projects, we prepare submittals that address house power vs. unit power, load management, and signage as required by building rules or CALGreen provisions for EV infrastructure.
Expert Electrical Workmanship
Expect neat, durable installations. We use copper THHN/THWN‑2 conductors in EMT for exposed runs, UV‑rated PVC where permitted outdoors, and NEMA 3R/4 enclosures for weather protection. Circuits are sized correctly (typically 40–60A), with 2‑pole GFCI breakers for NEMA 14‑50 where required, torque‑verified terminations, and clearly labeled panels. We anchor mounts into studs or masonry with proper hardware and seal penetrations for fire and weather. Every job is tested for voltage, breaker function, and charger operation before we leave.
Personalized Evaluation and Design
We start with a site walk to map the cleanest path from panel or meter room to your stall, considering garage clearances, HOA aesthetics, and City requirements. We optimize conduit routing, plan core drilling and fire‑stopping where needed, and select equipment that matches your vehicle, parking layout, and future needs. You get a clear plan showing scope, timeline, and costs—so there are no surprises. For condos and apartments, we also help package drawings and documentation for HOA approval.
What We Offer
Frequently Asked Questions
Do I need HOA approval to install an EV charger in my West Hollywood condo garage?+
Yes. Most HOAs require prior approval for EVSE, including drawings, equipment specs, and proof of code compliance. California Civil Code (often called “Right to Charge”) generally prevents HOAs from unreasonably prohibiting EV chargers, but they can set reasonable conditions. We prepare the submittal package, address house‑power vs. unit‑power metering, and coordinate with management to keep the process smooth.
Will my older Spanish Revival home need a panel upgrade?+
It depends on your existing service and loads. Many 1920s–1940s homes have 60–100A service that’s tight once air‑conditioning and appliances are counted. We run a formal load calculation and, if needed, recommend a 200A upgrade or a smart load management device to avoid upsizing. We’ll explain costs, timelines, and the pros and cons of each option before you decide.
How long do permits and inspections take in West Hollywood?+
Simple residential EV charger permits often move quickly, but plan on about 1–3 weeks from application to final inspection depending on scope and City workload. We submit promptly, answer plan‑check comments, and schedule inspections as soon as the City is available. Most standard installs are completed in 1–2 on‑site days once the permit is issued.
What charger types and connectors do you install?+
We install hardwired Level 2 EVSE and NEMA 14‑50 receptacles for portable chargers. Popular options include Tesla Wall Connector, ChargePoint Home Flex, and Wallbox Pulsar Plus. We ensure proper GFCI protection, commissioning, and app setup. If you plan to add a second EV later, we can design for power sharing or upgrade capacity so you won’t need to re‑wire.
Ready to Get Started?
Contact us today for a free consultation and quote on your electrical project!
Contact Us