Security & Motion Lighting in Hollywood
Keep your Hollywood storefronts, studios, and mixed\u2011use properties safer and better lit with commercial\u2011grade security and motion\u2011activated lighting. From the Walk of Fame along Hollywood Blvd to busy corners near Hollywood & Highland and Cahuenga, well\u2011designed exterior lighting deters trespassing, protects staff and patrons, and improves visibility for cameras. Shaffer Construction, Inc. designs and installs code\u2011compliant LED floods, wall packs, and smart sensors tailored to the way Hollywood businesses actually operate—late nights, alley deliveries, roof access, and shared parking. We plan strategically so you get bright light where you need it, without glare or complaints from neighbors. Expect rapid installation, clean workmanship, and reliable support after the job is done.
Our Work
Benefits
Lighting Solutions for Tomorrow
We design each system with scalable controls: 0–10V dimming drivers, networked photocells, NEMA 7‑pin nodes, and cloud‑managed time schedules. Motion sensors include PIR and microwave options matched to mounting height and detection zones. Where useful, we integrate lighting events with camera analytics or access control. Fixtures are DLC‑listed LEDs with programmable drivers, so you can adjust output and color temperature (typically 3000K–4000K) to meet site needs today and expand tomorrow without rewiring.
Permit & Code Compliance Experts
Shaffer Construction manages the entire compliance pathway—LADBS permits, plan check responses, and inspection scheduling. We design to the California Electrical Code (based on NEC), California Title 24 Part 6 outdoor lighting controls, and the LA Green Building Code. For nonresidential projects, we coordinate required Title 24 lighting controls acceptance testing. Our submittals include cut sheets, control narratives, and if needed, photometric summaries to address light trespass and glare concerns.
Excellence in Every Project
We use commercial‑grade wall packs, floods, and area lights with powder‑coated aluminum housings, IK‑rated lenses, and IP65+ ratings. Exterior wiring uses EMT or RMC with rain‑tight fittings; junctions are in NEMA 3R/4X enclosures with in‑use covers. Mounting hardware is stainless or hot‑dip galvanized for longevity. Circuits are labeled at the panel, and all terminations are torque‑verified. The result: bright, even illumination with minimal maintenance and long LED lifespans (often 50,000–100,000 hours).
Customized Security Lighting Design
Every Hollywood property is different. We start with a walkthrough to map entries, alleys, parking, gates, signage, and cameras. We select optics (Type II/III/IV), lumen packages, and sensor ranges to meet IES target light levels without spillover. Where aesthetics matter—historic facades on Hollywood Blvd or Sunset—we specify low‑profile, color‑matched fixtures. Final plans include control zoning, schedules, and mounting heights that align with operations, security goals, and Title 24 requirements.
What We Offer
Frequently Asked Questions
Do I need a permit for exterior security lights in Hollywood?+
Most new circuits or control upgrades require an LADBS electrical permit. Simple like‑for‑like fixture swaps may qualify for express permitting. We confirm requirements during our site visit and handle the permit, plan check responses, and inspection scheduling for you. Expect 2–4 weeks for permitting, longer for large commercial scopes.
Will motion lighting bother neighboring properties or tenants?+
We use cutoff optics, shields, and careful aiming to keep light on your property. Motion sensors are tuned for range and dwell time, and we often set bi‑level modes—dimmed background light that brightens only when needed. For sensitive sites, we can produce basic photometric summaries to demonstrate minimal light trespass.
Can you integrate lighting with my existing cameras or alarm system?+
Yes. We align lighting zones with camera fields of view and can coordinate triggers so lights brighten when motion or analytics detect activity. Even without direct integration, consistent illumination improves camera performance and identification quality.
What color temperature and brightness do you recommend for security lighting?+
For security and camera clarity, 3500K–4000K is a good neutral range. Brightness depends on area use—alleys and entries often target 0.5–2.0 foot‑candles with even coverage. We select lumen packages and optics to meet these levels while minimizing glare and sky glow.
Are there rebates for upgrading to LED security lighting?+
LADWP periodically offers commercial lighting incentives for efficient exterior fixtures and controls. We’ll help identify current programs, estimate savings, and prepare the documentation needed to pursue incentives, which can shorten the payback timeline on your project.
How fast can you install once permitted?+
Most commercial security and motion lighting installations take 1–3 days, depending on the number of fixtures, circuit additions, and site access. We schedule work to minimize impact on business hours and coordinate any required outages in advance.
Whether you manage a mixed‑use building on Vine, a boutique on Melrose, or a restaurant near the Pantages, we tailor security and motion lighting to your site’s risks and operations. We plan placements to eliminate blind spots, choose optics that reduce glare and trespass, and program controls that save energy without compromising safety. From the first walkthrough to LADBS sign‑off, Shaffer Construction handles the details: code compliance, materials, installation, and fine‑tuning. You’ll get a clean, professional result that makes your property safer and easier to manage. Ready to improve visibility and peace of mind? Call or text (323) 642‑8509 or email hello@shaffercon.com to schedule a no‑pressure assessment and estimate. We’re here to help Hollywood businesses shine after dark.
Ready to Get Started?
Contact us today for a free consultation and quote on your electrical project!
Contact Us